How to Enable Remote Desktop on Windows 11

Remote Desktop is a feature in Windows 11 that allows you to remotely control and access your PC from another device. Whether you're troubleshooting an issue or need to access files and applications while away from your computer, enabling Remote Desktop can be a very useful tool. This guide will walk you through the process of enabling Remote Desktop on Windows 11.

Prerequisites

Before enabling Remote Desktop, make sure the following requirements are met:
- You must be running Windows 11 Pro, Enterprise, or Education. Remote Desktop is not available on Windows 11 Home edition.
- You need an active internet connection if you want to access your PC remotely from a different network.

Method 1: Enable Remote Desktop via Settings

The easiest way to enable Remote Desktop on Windows 11 is through the Settings app.

Step 1: Open Settings
1. Press Windows + I on your keyboard to open the Settings app.
2. In the left-hand menu, click on System.

Step 2: Navigate to Remote Desktop
1. Scroll down and click on Remote Desktop.
2. In the Remote Desktop section, toggle the switch to On.

Step 3: Confirm Remote Desktop Access
1. When prompted, click Confirm to allow Remote Desktop to be enabled.
2. You can also check the box labeled Require devices to use Network Level Authentication (NLA) to connect. This option adds a layer of security, requiring users to authenticate before establishing a remote connection.

Step 4: Get Your PC’s Name
1. To connect to this PC later, you’ll need its name. Under the Remote Desktop section, click PC Name.
2. Note the PC name (e.g., DESKTOP-XXXXXXX) for future use when connecting remotely.

Your PC is now configured for remote connections.

Method 2: Enable Remote Desktop via Control Panel

Another method to enable Remote Desktop is through the Control Panel.

Step 1: Open Control Panel
1. Press Windows + S and type Control Panel, then press Enter.

Step 2: Navigate to System Settings
1. In Control Panel, click on System and Security, then click on System.
2. On the left-hand side, click Remote settings.

Step 3: Enable Remote Desktop
1. In the System Properties window, under the Remote tab, find the section labeled Remote Desktop.
2. Select the option Allow remote connections to this computer.
3. Check the box for Allow connections only from computers running Remote Desktop with Network Level Authentication (NLA) to ensure secure access.
4. Click OK to apply the changes.

Method 3: Enable Remote Desktop via Command Prompt

If you prefer using the command line, you can also enable Remote Desktop using Command Prompt.

Step 1: Open Command Prompt
1. Press Windows + S, type cmd, and select Run as administrator.

Step 2: Run the Command
1. In the Command Prompt window, type the following command and press Enter:
 

How to Unlock "God Mode" in Windows 11


"God Mode" in Windows 11 is a hidden feature that gives you quick access to advanced settings and controls all in one place. It's not really a "mode," but rather a folder that contains shortcuts to various system tools and settings that are otherwise spread across the operating system. This feature is particularly useful for power users who want to customize their system or access specific settings more efficiently.

Here’s a step-by-step guide on how to unlock and use God Mode in Windows 11.

What Is God Mode?

God Mode is a special folder in Windows that provides access to more than 200 system settings. These include settings related to:
- Administrative Tools
- Backup and Restore
- Date and Time
- Device Manager
- Disk Management
- Folder Options
- Network and Sharing
- Troubleshooting
- User Accounts
... and much more.

God Mode allows you to access all these settings in one convenient location, rather than navigating through the Control Panel or the Settings app.

How to Enable God Mode in Windows 11

Follow these simple steps to unlock God Mode on your Windows 11 system:

Step 1: Create a New Folder
1. Right-click on an empty space on your desktop.
2. From the context menu, select New, and then click Folder.
3. This will create a new folder on your desktop.

Step 2: Rename the Folder
1. Right-click the new folder and select Rename.
2. Copy and paste the following text as the new name for the folder:
 

How to Determine If Your Machine is 32-bit or 64-bit in Windows 11

Knowing whether your Windows 11 system is 32-bit or 64-bit is important when installing software or drivers, as many applications are specifically designed for one type of system architecture. Fortunately, determining whether your machine is running a 32-bit or 64-bit version of Windows 11 is straightforward. This guide will show you multiple methods to find out.

Method 1: Using the Settings App

The easiest way to check if your Windows 11 system is 32-bit or 64-bit is through the Settings app.

1. Press Windows + I on your keyboard to open the Settings app.
2. In the left-hand menu, click on System.
3. Scroll down and click About.
4. Under the Device specifications section, look for the System type. This will tell you whether your system is running a 32-bit or 64-bit version of Windows, and whether your processor (CPU) is capable of running 64-bit.

You’ll see one of the following options:
- 32-bit operating system, x64-based processor: Your system is running a 32-bit version of Windows, but your processor supports 64-bit.
- 32-bit operating system, x86-based processor: Your system is running a 32-bit version of Windows and your processor only supports 32-bit.
- 64-bit operating system, x64-based processor: Your system is running a 64-bit version of Windows and your processor supports 64-bit.

Method 2: Using Control Panel

You can also check if your system is 32-bit or 64-bit using the Control Panel.

1. Press Windows + S to open Windows Search, then type Control Panel, and press Enter.
2. In Control Panel, click on System and Security, then click System.
3. Under the System section, look for System type. This will show if your system is 32-bit or 64-bit, and the type of processor your machine has (32-bit or 64-bit).

This method provides the same information as the Settings app, showing whether your operating system and processor are 32-bit or 64-bit.

Method 3: Using System Information

Another method to check your system architecture is through the System Information tool.

1. Press Windows + S to open Windows Search, then type System Information, and press Enter.
2. In the System Information window, look for the System Type entry on the right-hand side.
  - If it says x64-based PC, your system is 64-bit.
  - If it says x86-based PC, your system is 32-bit.

This method provides a detailed breakdown of your system’s specifications.

Method 4: Using Command Prompt

For those who prefer using the command line, you can also check if your system is 32-bit or 64-bit using the Command Prompt.

1. Press Windows + S, type cmd, and select Run as administrator to open the Command Prompt with elevated privileges.
2. Type the following command and press Enter:
 

How to Make Hidden Files Visible on Windows 11

Windows 11, like previous versions of Windows, allows you to hide certain files and folders to prevent accidental deletion or modification. However, there are times when you may need to access these hidden files. Fortunately, making hidden files visible in Windows 11 is a straightforward process. This guide will show you how to view hidden files using File Explorer and through the Control Panel.

Method 1: Using File Explorer

The easiest way to make hidden files visible in Windows 11 is through File Explorer.

1. Press Windows + E on your keyboard to open File Explorer.
2. In the File Explorer window, click the View tab on the top toolbar.
3. From the dropdown menu, hover over Show, and then select Hidden items.

Once you select Hidden items, the hidden files and folders will immediately become visible in the current directory. Hidden files are displayed with semi-transparent icons to differentiate them from regular files.

Method 2: Using File Explorer Options

Another way to make hidden files visible is by changing the folder options.

1. Press Windows + E to open File Explorer.
2. In the top-right corner, click the three-dot menu (More options), and then click Options.
3. In the Folder Options window, go to the View tab.
4. Under Advanced settings, scroll down and find the option labeled Hidden files and folders.
5. Select Show hidden files, folders, and drives.
6. Click Apply, then click OK.

Your hidden files will now be visible in File Explorer, and the setting will persist until you change it again.

Method 3: Using Control Panel

You can also make hidden files visible through the Control Panel.

1. Press Windows + S to open Windows Search, then type Control Panel, and press Enter.
2. In the Control Panel, click on Appearance and Personalization.
3. Under File Explorer Options, click Show hidden files and folders.
4. In the Folder Options window, go to the View tab.
5. Under Hidden files and folders, select Show hidden files, folders, and drives.
6. Click Apply and then OK.

This method allows you to adjust the hidden file visibility across all folders on your system.

Method 4: Using Command Prompt

For advanced users, you can use the Command Prompt to make hidden files visible.

1. Press Windows + S and type cmd, then select Run as administrator to open the Command Prompt with administrative privileges.
2. Navigate to the folder where you want to show hidden files by using the cd command. For example:
 

Understanding the Windows Registry in Windows 11


The Windows Registry is a hierarchical database that stores configuration settings and options for Microsoft Windows operating systems. In Windows 11, the registry plays a crucial role in managing the operating system’s hardware, software, user profiles, and preferences. It contains settings for system components, applications, and drivers, allowing Windows to function efficiently. This guide will help you understand how the Windows Registry works in Windows 11, how to navigate it, and how to safely make changes.

What is the Windows Registry?

The Windows Registry is a centralized storage area for system configuration data. It consists of keys and values that act like folders and files, respectively. Each key contains subkeys and values, which are essentially settings or instructions that Windows or an application uses.

The registry is essential for the following reasons:
- Storing hardware configurations
- Managing software settings and user preferences
- Defining system-wide configurations for drivers and applications
- Keeping track of user profiles, network connections, and installed software

Accessing the Windows Registry

In Windows 11, you can access and edit the registry using the built-in Registry Editor.

How to open the Registry Editor:
1. Press Windows + R to open the Run dialog.
2. Type regedit and press Enter.
3. You may receive a User Account Control (UAC) prompt. Click Yes to proceed.
4. The Registry Editor window will open, displaying the registry’s hierarchical structure.

Understanding the Registry Structure

The registry in Windows 11 is organized into five main root keys, each containing a specific set of data. These root keys are:

1. HKEY_CLASSES_ROOT (HKCR): Contains information about registered applications, file associations, and Object Linking and Embedding (OLE) objects. It’s used to manage how files are opened and linked in Windows.
 
2. HKEY_CURRENT_USER (HKCU): Stores configuration information for the currently logged-in user. This includes user preferences, desktop settings, and other personalized configurations.

3. HKEY_LOCAL_MACHINE (HKLM): Contains configuration data for the local machine, including hardware settings, installed software, and system-wide configurations that affect all users.

4. HKEY_USERS (HKU): Stores information about all user profiles on the computer. Each user account has its own subkey under this root key.

5. HKEY_CURRENT_CONFIG (HKCC): Contains information about the current hardware profile of the computer, such as device drivers and system settings used during startup.

Each root key contains subkeys and values, which are further organized into folders.

Navigating the Registry

Once inside the Registry Editor, you can navigate through the registry like you would with a file explorer.

1. On the left side, you'll see a hierarchical structure of root keys and subkeys.
2. Click the arrow next to a key to expand its contents.
3. The subkeys will appear, each containing values related to the key.
4. When you select a subkey, the values (or settings) associated with it will be displayed on the right side of the window.

Making Changes to the Registry

Before making any changes to the registry, it is crucial to back up your current registry settings to avoid any potential system issues.

How to back up the registry:
1. In the Registry Editor, navigate to the key or folder you want to back up.
2. Right-click the key and select Export.
3. Choose a location to save the backup file, name it, and click Save.
4. If you ever need to restore the registry, you can double-click the exported file to import it back.

How to modify a registry key:
1. Navigate to the key or value you want to change.
2. Right-click the value on the right pane and select Modify.
3. In the dialog box, change the value as needed and click OK.

How to add a new registry key or value:
1. Navigate to the key where you want to add a new subkey or value.
2. Right-click the key on the left pane and select New, then choose the type of value (e.g., String Value, DWORD, etc.).
3. Give the new value a name and press Enter.
4. Right-click the new value, select Modify, and enter the appropriate data.

Common Registry Modifications in Windows 11

Here are a few common tweaks users can make to the registry in Windows 11:

1. Disable the Lock Screen:
Navigate to: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows
- Right-click the Windows key, select New, then Key and name it Personalization.
- Right-click Personalization, select New, then DWORD (32-bit) Value.
- Name it NoLockScreen and set its value to 1.

2. Change the Registered Owner Name:
Navigate to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
- Look for RegisteredOwner in the right pane, right-click it, and select Modify.
- Enter the desired name in the Value data field and click OK.

Important Considerations

Modifying the Windows Registry can have serious consequences if done incorrectly. Always follow these safety tips:
- Back up your registry before making any changes.
- Only modify registry keys or values if you fully understand their purpose.
- Avoid using registry cleaning software, as these tools can sometimes delete important keys or values.

Conclusion

The Windows Registry in Windows 11 is a powerful tool for managing system settings, software configurations, and user preferences. While making changes to the registry can improve your Windows experience, it’s essential to handle it carefully and always create a backup before making any modifications. With the right knowledge, the registry can help you fine-tune your system and resolve issues that are otherwise difficult to fix.

Feel free to explore the registry, but remember to be cautious and always proceed with care!

How to Boot into Safe Mode on Windows Vista

Booting into Safe Mode in Windows Vista is a useful way to troubleshoot problems with your system. Safe Mode starts your PC with only essential drivers and services, which can help diagnose issues caused by software or drivers. Here's a detailed guide on how to boot into Safe Mode on Windows Vista.

Method 1: Using the F8 Key During Startup

The most common method to enter Safe Mode in Windows Vista is by using the F8 key during startup.

1. Turn off your computer completely.
2. Turn it back on and, as soon as your computer starts, repeatedly press the F8 key on your keyboard before the Windows logo appears.
3. You will see the Advanced Boot Options screen. Use the arrow keys to highlight Safe Mode and press Enter.
4. If you need internet access while in Safe Mode, select Safe Mode with Networking instead.
5. Windows Vista will now start in Safe Mode. You’ll notice the screen resolution is lower, and the words "Safe Mode" appear in the corners of the screen. This is normal in Safe Mode.

Method 2: Using System Configuration (msconfig)

You can also use the System Configuration tool to make Windows Vista boot into Safe Mode automatically.

1. Press Windows + R on your keyboard to open the Run dialog.
2. Type msconfig and press Enter.
3. In the System Configuration window, click the Boot tab.
4. Under Boot options, check the box next to Safe boot.
5. Choose Minimal for regular Safe Mode or Network if you need networking support.
6. Click OK, then click Restart.
7. Your PC will now restart and automatically boot into Safe Mode.
8. Once you're done troubleshooting, go back to msconfig, uncheck the Safe boot option, and restart your computer to return to normal Windows.

Method 3: Using a Windows Vista Installation Disk or Repair Disk

If your system is not booting normally, you can use a Windows Vista installation disk or a system repair disk to boot into Safe Mode.

1. Insert your Windows Vista installation disk or system repair disk and restart your computer.
2. When prompted, press any key to boot from the CD/DVD.
3. On the Install Windows screen, select your language preferences and click Next.
4. In the lower-left corner of the screen, click Repair your computer.
5. The System Recovery Options menu will appear. Select the Windows Vista installation you want to repair, and click Next.
6. From the list of recovery tools, choose Command Prompt.
7. In the Command Prompt window, type the following command and press Enter:
 

How to Boot into Safe Mode on Windows 7

Safe Mode in Windows 7 is a troubleshooting option that starts your computer with only the essential drivers and services. It can help you diagnose and resolve issues such as driver conflicts, malware infections, or software crashes. Here’s a detailed guide on how to boot into Safe Mode on Windows 7.

Method 1: Using the F8 Key

The easiest way to access Safe Mode in Windows 7 is by using the F8 key during the startup process.

1. Turn off your computer completely.
2. Turn it back on and as soon as it starts booting, repeatedly press the F8 key. You need to press this key before the Windows logo appears.
3. You will see the Advanced Boot Options menu. Use the arrow keys to highlight Safe Mode and press Enter.
4. If you need networking support in Safe Mode, select Safe Mode with Networking instead.
5. Your PC will now boot into Safe Mode.

You will notice that Safe Mode loads with a minimal set of drivers and that the screen resolution is lower than usual. This is normal in Safe Mode.

Method 2: Using System Configuration (msconfig)

You can also use the System Configuration tool to force Windows 7 to boot into Safe Mode automatically.

1. Press Windows + R on your keyboard to open the Run dialog.
2. Type msconfig and press Enter.
3. In the System Configuration window, go to the Boot tab.
4. Under Boot options, check the box next to Safe boot.
5. Choose Minimal for standard Safe Mode or Network if you need internet access.
6. Click OK, then click Restart.
7. Your computer will now boot into Safe Mode.
8. When you’re done troubleshooting, reopen msconfig, uncheck Safe boot, and restart your computer to return to normal mode.

Method 3: Using a Windows 7 Installation Disk or Repair Disk

If your system is not booting normally, you can access Safe Mode using a Windows 7 installation or repair disk.

1. Insert your Windows 7 installation disk or system repair disk and restart your computer.
2. Press any key when prompted to boot from the disk.
3. On the Install Windows screen, select your language and click Next.
4. Click Repair your computer in the lower-left corner.
5. In the System Recovery Options menu, select the operating system you want to repair and click Next.
6. Choose Command Prompt from the list of recovery tools.
7. In the Command Prompt window, type bcdedit /set {default} safeboot minimal and press Enter.
8. Close the Command Prompt and restart your computer.
9. Your PC will now boot into Safe Mode.

To exit Safe Mode after troubleshooting, follow these steps:

1. Boot from the installation disk again.
2. Open Command Prompt from the System Recovery Options.
3. Type bcdedit /deletevalue {default} safeboot and press Enter.
4. Restart your computer to boot into normal Windows.

Method 4: Interrupting the Boot Process

If your system is not starting correctly, you can force Safe Mode by interrupting the boot process.

1. Turn on your computer and as it starts to boot, press and hold the Power button until the computer shuts down.
2. Repeat this process two more times.
3. After the third forced shutdown, your PC should automatically enter the Windows Error Recovery screen.
4. Use the arrow keys to highlight Safe Mode and press Enter.

Exiting Safe Mode

To exit Safe Mode and return to normal mode, simply restart your computer. If you used msconfig to enter Safe Mode, make sure to uncheck the Safe boot option in the Boot tab before restarting.

That’s it! You now know how to boot into Safe Mode on Windows 7 using different methods. Safe Mode is an excellent way to diagnose system problems and resolve issues without third-party drivers or services getting in the way.

How to Boot into Safe Mode on Windows 8

Booting into Safe Mode in Windows 8 is a great way to troubleshoot problems. Safe Mode starts your PC with a minimal set of drivers and services, which can help identify and resolve issues. Here’s a detailed step-by-step guide on how to boot into Safe Mode in Windows 8.

Method 1: Using the Shift + Restart Option

1. Go to the Start screen and press the Power button. You can also do this from the Windows 8 Charms bar.
2. While holding down the Shift key, click Restart.
3. Continue holding the Shift key until the Choose an option screen appears.
4. From the options, select Troubleshoot.
5. On the Troubleshoot screen, click Advanced options.
6. Choose Startup Settings, then click Restart.
7. After your computer restarts, you will see a list of options. Press 4 or F4 to boot into Safe Mode. If you need networking in Safe Mode, press 5 or F5.

Congratulations! Your PC is now in Safe Mode.

Method 2: Using the System Configuration Tool (msconfig)

1. Press Windows + R on your keyboard to open the Run dialog.
2. Type msconfig and press Enter.
3. In the System Configuration window, go to the Boot tab.
4. Under Boot options, check the box next to Safe boot. Select Minimal for normal Safe Mode or Network if you need internet access in Safe Mode.
5. Click OK, then click Restart.
6. Your computer will now boot into Safe Mode automatically.
7. Once you’re done troubleshooting, reopen msconfig, uncheck Safe boot, and restart your computer to return to normal Windows.

Method 3: From the Sign-in Screen

1. If you are at the Windows 8 sign-in screen, press and hold the Shift key, then click the Power button in the lower-right corner of the screen.
2. While holding the Shift key, click Restart.
3. Keep holding Shift until you see the Choose an option screen.
4. Click Troubleshoot, then click Advanced options.
5. Select Startup Settings, and click Restart.
6. After the restart, you will see several boot options. Press 4 or F4 to start in Safe Mode. For Safe Mode with networking, press 5 or F5.

Method 4: Using a Bootable USB or Installation Disk

If your system won't boot normally, you can enter Safe Mode using a bootable USB drive or the Windows 8 installation disk.

1. Insert your Windows 8 installation media (USB or DVD) and restart your PC.
2. When prompted, press a key to boot from the installation media.
3. On the Windows Setup screen, choose your language preferences and click Next.
4. Click Repair your computer in the bottom-left corner.
5. From the Choose an option screen, select Troubleshoot.
6. Then, go to Advanced options > Startup Settings, and click Restart.
7. After your PC restarts, press 4 or F4 for Safe Mode. For Safe Mode with Networking, press 5 or F5.

Method 5: Interrupting the Boot Process

If your system fails to boot, you can force it into Safe Mode by interrupting the boot process:

1. Press and hold the Power button for 10 seconds to force a shutdown.
2. Repeat this process two more times (you need to turn off your PC three times while it is booting).
3. After the third time, Windows will enter the Windows Recovery Environment (WinRE).
4. On the Choose an option screen, select Troubleshoot.
5. Then, go to Advanced options > Startup Settings, and click Restart.
6. Once your PC restarts, press 4 or F4 to enter Safe Mode.

Exiting Safe Mode

To exit Safe Mode, simply restart your PC. If you used the msconfig method to enter Safe Mode, make sure to uncheck Safe boot in the Boot tab before restarting your system to return to normal mode.

That's it! Now you know how to boot into Safe Mode on Windows 8 using multiple methods. Safe Mode is an essential tool for diagnosing and fixing system issues, and knowing how to access it can help you quickly troubleshoot any problems that arise.

How to Boot into Safe Mode on Windows 10

Booting into Safe Mode in Windows 10 is a great way to troubleshoot issues that might prevent your system from running correctly. In Safe Mode, only the essential drivers and services are loaded, making it easier to diagnose and fix problems. Here's a step-by-step guide on how to boot into Safe Mode in Windows 10.

Method 1: Using the Settings Menu

1. Press the Windows key on your keyboard, or click the Start menu, then select Settings (the gear icon).
2. In the Settings window, select Update & Security.
3. On the left-hand menu, click Recovery.
4. Under the Advanced startup section, click Restart now. Your PC will restart into the Windows Recovery Environment (WinRE).
5. Once the Choose an option screen appears, select Troubleshoot.
6. From the Troubleshoot menu, select Advanced options.
7. Select Startup Settings, and then click Restart.
8. After your PC restarts, you will see a list of options. Press 4 or F4 to boot into Safe Mode. If you need network support in Safe Mode, press 5 or F5.

Your PC will now boot into Safe Mode!

Method 2: Using Shift + Restart from the Start Menu

1. Hold down the Shift key on your keyboard.
2. While holding Shift, click the Start menu, then click the Power button, and select Restart.
3. Continue holding Shift until the Choose an option screen appears.
4. From here, click Troubleshoot.
5. Then, click Advanced options.
6. Select Startup Settings, and then click Restart.
7. Once your PC restarts, you'll be presented with a list of options. Press 4 or F4 to boot into Safe Mode. To enable Safe Mode with Networking, press 5 or F5.

Method 3: Using System Configuration (msconfig)

1. Press Windows + R on your keyboard to open the Run dialog box.
2. Type msconfig and press Enter.
3. In the System Configuration window, click the Boot tab.
4. Under Boot options, check the box next to Safe boot.
5. Choose Minimal for regular Safe Mode or Network if you need internet access in Safe Mode.
6. Click OK, then click Restart to boot into Safe Mode.
7. After troubleshooting, repeat the steps, but this time uncheck Safe boot to boot back into normal Windows.

Method 4: Interrupt the Startup Process

If your system is not booting correctly, you can force it into Safe Mode by interrupting the startup process.

1. Press and hold the Power button for 10 seconds to turn off your PC while it is booting.
2. Repeat this process two more times. After the third time, Windows will automatically enter Windows Recovery Environment (WinRE).
3. On the Choose an option screen, select Troubleshoot.
4. From there, select Advanced options, then Startup Settings.
5. Click Restart, and after the restart, press 4 or F4 for Safe Mode. To access the internet in Safe Mode, press 5 or F5.

Exiting Safe Mode

To exit Safe Mode, simply restart your PC normally. If you used msconfig to enter Safe Mode, make sure to go back to the System Configuration window, uncheck Safe boot, and then restart your PC to return to normal mode.

That's it! You are now familiar with different ways to boot into Safe Mode on Windows 10. Safe Mode is an essential tool for diagnosing and resolving system issues without interference from third-party applications or drivers.

How to Boot into Safe Mode on Windows 11

Sometimes, you may need to troubleshoot issues on your Windows 11 PC by starting it in Safe Mode. Safe Mode only loads the essential drivers and services, helping you diagnose and fix problems with your system. Here’s a step-by-step guide on how to boot into Safe Mode on Windows 11.

Method 1: Using Settings

1. Press the Windows key or click the Start menu, then select Settings.
2. In the Settings window, click System, then scroll down and select Recovery.
3. Under Recovery options, find the Advanced startup option and click Restart now.
4. Windows will ask you to confirm the restart. Click Restart now again. Your PC will now restart into the Windows Recovery Environment (WinRE).
5. Once your PC restarts, you will see a blue screen with several options. Choose Troubleshoot.
6. Next, select Advanced options.
7. In the Advanced options menu, select Startup Settings, and then click Restart.
8. After your PC restarts, you will see a list of startup options. Press 4 or F4 to boot into Safe Mode. If you need network support in Safe Mode, press 5 or F5 instead.

Congratulations! Your PC is now in Safe Mode.

Method 2: Using the Shift + Restart Method

1. On your Windows 11 desktop, hold down the Shift key.
2. While holding the Shift key, click the Start button, then click the Power icon and select Restart.
3. Keep holding the Shift key until you see the blue Choose an option screen.
4. Select Troubleshoot.
5. Then, select Advanced options.
6. Choose Startup Settings, and click Restart.
7. Once your PC restarts and shows a list of options, press 4 or F4 to enter Safe Mode. For Safe Mode with networking, press 5 or F5.

Method 3: Using System Configuration (msconfig)

1. Press the Windows + R keys to open the Run dialog box.
2. Type msconfig and press Enter.
3. In the System Configuration window, go to the Boot tab.
4. Under Boot options, check the box next to Safe boot.
5. Select Minimal for regular Safe Mode or Network for Safe Mode with Networking.
6. Click OK, then click Restart. Your PC will now boot into Safe Mode.
7. When you're done with Safe Mode, open msconfig again, uncheck Safe boot, and restart your PC to boot back into normal mode.

Method 4: Interrupting the Boot Process

1. If your system is not booting correctly, you can force Windows to enter Safe Mode by interrupting the boot process.
2. Press and hold the power button to turn off your PC while it is booting up.
3. Repeat this process two more times (three times in total).
4. After the third attempt, your PC will enter the Windows Recovery Environment (WinRE).
5. From here, follow the steps under Method 1 to access Troubleshoot > Advanced options > Startup Settings and boot into Safe Mode.

Exiting Safe Mode

To exit Safe Mode, simply restart your PC normally. If you used the System Configuration (msconfig) method, make sure to uncheck Safe boot in the Boot tab to boot back into regular Windows.

That's it! You now know how to boot into Safe Mode in Windows 11 using several methods. Safe Mode is a great tool for diagnosing issues and resolving them without additional drivers or services interfering with the process.