Disk Drill - Printable Version +- WildlandsTech (https://wildlandstech.com) +-- Forum: Computer Software (https://wildlandstech.com/forumdisplay.php?fid=8) +--- Forum: Drive Software (https://wildlandstech.com/forumdisplay.php?fid=47) +--- Thread: Disk Drill (/showthread.php?tid=399)

Disk Drill - Sneakyone - 09-05-2024 Disk Drill: Comprehensive Setup and Usage Guide 1. Download and Install Disk Drill Visit the official Disk Drill website. Click "Download" to get the free version or choose a paid version for additional features. Once the installer is downloaded, open the file and follow the on-screen instructions to complete the installation. After installation, launch Disk Drill from your desktop or Start menu. 2. Understanding the Disk Drill Interface The main interface of Disk Drill consists of:     Drive List: Displays all available drives and devices, including internal drives, external drives, and memory cards.   Data Recovery Options: Offers options to scan for lost files, recover partitions, and more.   Scan Progress Area: Displays the progress of scans and the number of recoverable files.   File Preview and Recovery Pane: Allows you to preview files before recovery and select specific files for retrieval.   The interface is user-friendly, providing quick access to essential data recovery features. 3. Start a Quick or Deep Scan Disk Drill offers both a Quick Scan and Deep Scan to find lost data. To perform a scan:     Select the drive or device from which you want to recover data.   Click "Search for Lost Data" to initiate the scan.   Quick Scan: Locates recently deleted files and usually takes only a few minutes. Deep Scan: Performs a thorough search across the entire drive, recovering lost data from formatted or corrupted drives. This scan may take longer. Once the scan completes, Disk Drill will display all recoverable files. 4. Filter and Search for Specific Files After a scan, you can filter the results to find specific files easily. To filter files:     Use the "Filter" options to sort by file type (e.g., Documents, Pictures, Videos).   To search for a specific file:     Use the Search Bar to enter the file name or extension (e.g., "report.docx" or ".jpg").   Filtering and searching help you quickly find the exact files you need to recover. 5. Preview Files Before Recovery Disk Drill allows you to preview files before recovering them to ensure that the files are intact and correct. To preview a file:     Select a file from the scan results.   Click "Preview" to open the file in the preview window.   This is particularly useful for media files like images, videos, and documents, as it helps you confirm that the data is recoverable. 6. Recover Lost Data After selecting the files you want to recover, you can proceed with the data recovery process. To recover files:     Check the boxes next to the files or folders you want to recover.   Click "Recover".   Choose a safe location to save the recovered files (avoid saving them on the same drive to prevent overwriting).   Disk Drill will recover the selected files and save them to the chosen location. 7. Recover Data from Formatted or Corrupted Drives Disk Drill can recover data from formatted or corrupted drives using the Deep Scan option. To recover data from a formatted or corrupted drive:     Select the formatted or corrupted drive from the list.   Run a Deep Scan to search for lost data.   After the scan is complete, filter or search for the files you need to recover. Once identified, follow the same steps to recover the files. 8. Recover Deleted Partitions Disk Drill includes the ability to recover deleted or lost partitions. To recover a partition:     Select the disk where the partition was located.   Click on "Search for Lost Partitions".   Disk Drill will scan for lost partitions and attempt to restore them. Once found, you can recover the data from the lost partition just like any other recovery process. 9. Use Disk Drill on External Devices Disk Drill supports recovery from external devices such as USB drives, memory cards, and external hard drives. To recover data from an external device:     Connect the device to your computer.   Ensure that the device appears in the drive list in Disk Drill.   Run a Quick or Deep Scan to find lost data.   Once the scan is complete, you can recover the data from the external device following the standard recovery process. 10. Pause and Resume Scans If you cannot complete a scan in one session, Disk Drill allows you to pause and resume the scan later. To pause a scan:     During a scan, click the "Pause" button to temporarily stop the scan.   To resume a scan:     Click "Resume" to continue the scan from where it was paused.   This feature is useful when scanning large drives or when time is limited. 11. Save and Load Scan Sessions You can save the progress of a scan and reload it later to continue where you left off. To save a scan session:     After a scan completes or is paused, click "Save Session".   To load a saved scan session:     Open Disk Drill and click "Load Session" to pick up where you left off.   This feature is helpful for large recovery operations that may take multiple sessions to complete. 12. Create a Disk Backup for Safe Recovery Disk Drill allows you to create a byte-level disk backup before attempting recovery. This is useful for drives that are failing or unstable. To create a disk backup:     Go to "Extras" and select "Create Disk Image".   Choose the drive you want to back up and select the output location for the disk image.   Once the disk image is created, you can use it to perform data recovery without risking further damage to the original drive. Key Features of Disk Drill Quick and Deep Scans: Locate recently deleted files and recover data from formatted or corrupted drives. Partition Recovery: Restore lost or deleted partitions along with their data. Preview Files: View files before recovery to ensure accuracy. Filter and Search Options: Easily find specific files by type or name. External Device Support: Recover files from USB drives, external hard drives, memory cards, and more. Pause and Resume Scans: Pause long scans and resume them later. Save and Load Sessions: Save scan sessions and reload them to continue the recovery process. Disk Backup: Create disk images for safe data recovery from unstable or failing drives. Troubleshooting and Support If Disk Drill is not detecting your drive, ensure the drive is properly connected and recognized by your computer. If scans are taking a long time, try running a Quick Scan first before performing a Deep Scan. Visit the Disk Drill Help Center for more detailed guides, FAQs, and troubleshooting support. Contact Disk Drill support if you encounter further issues or need assistance with advanced recovery options. Recover your lost data efficiently with Disk Drill!