Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Guide to Turn On or Off Connect Automatically to Wireless Network in Windows 10
#1
Guide to Turn On or Off Connect Automatically to Wireless Network in Windows 10

Windows 10 allows you to automatically connect to a saved wireless network whenever it is in range. This feature is convenient for home or trusted networks, but you may want to disable it for public or less secure networks. This guide will show you how to turn on or off the "Connect Automatically" option for wireless networks in Windows 10.

Method 1: Using the Taskbar Network Icon

The quickest way to enable or disable the "Connect Automatically" feature is through the Wi-Fi icon on the taskbar.

Steps to Enable or Disable Connect Automatically:
1. Click the Wi-Fi icon in the taskbar at the bottom-right corner of your screen.
2. A list of available networks will appear. Locate the Wi-Fi network you want to manage.
3. If you're already connected to the network, click Disconnect to see the "Connect Automatically" option.
4. Once disconnected, click on the Wi-Fi network name to expand the options.
5. Below the network name, you will see a checkbox labeled Connect automatically.
6. To enable automatic connection, check the box. To disable it, uncheck the box.
7. Click Connect to reconnect to the network with your selected settings.
8. If you checked the box, Windows will automatically connect to this network when it’s in range. If unchecked, it will require manual reconnection.

Method 2: Using Network & Internet Settings

You can also control the "Connect Automatically" option through the Network & Internet settings menu.

Steps:
1. Click the Start menu and select Settings (gear icon).
2. In the Settings window, click on Network & Internet.
3. In the left sidebar, select Wi-Fi.
4. Under the Wi-Fi section, click on Manage known networks.
5. A list of saved networks will appear. Find and select the network you want to manage.
6. Click on Properties.
7. In the network properties window, you will see the Connect automatically when in range option.
8. Toggle the switch On to enable automatic connection or Off to disable it.

Method 3: Using Command Prompt

For advanced users, you can also enable or disable the "Connect Automatically" feature using the Command Prompt.

Steps to Disable Connect Automatically:
1. Press Windows + X and select Command Prompt (Admin) or Windows PowerShell (Admin).
2. Type the following command and press Enter to display all known networks:
 
Code:
netsh wlan show profiles
3. Note the name of the Wi-Fi network for which you want to disable automatic connection.
4. To disable automatic connection for that network, type the following command:
 
Code:
netsh wlan set profileparameter name="NETWORK_NAME" connectionmode=manual
  Replace NETWORK_NAME with the actual name of your network.
5. Press Enter. This will disable automatic connection to the specified network.

Steps to Enable Connect Automatically:
1. Open Command Prompt (Admin) or Windows PowerShell (Admin) as shown above.
2. Type the following command to enable automatic connection for a specific network:
 
Code:
netsh wlan set profileparameter name="NETWORK_NAME" connectionmode=auto
3. Press Enter, and the automatic connection will be enabled for the specified network.

Method 4: Using the Wi-Fi Settings Menu When Connecting

Whenever you connect to a new network, Windows 10 gives you the option to set it to connect automatically.

Steps:
1. Click the Wi-Fi icon in the taskbar.
2. Select the Wi-Fi network you want to connect to.
3. When prompted to enter the password, you will see a checkbox labeled Connect automatically.
4. Check the box if you want Windows to remember this network and connect automatically in the future.
5. Uncheck the box if you prefer to connect manually.
6. After entering the password and clicking Connect, the setting will be saved.

Method 5: Forgetting a Network to Reset Connection Preferences

If you want to reset the connection settings for a network, you can "forget" the network and reconnect with the desired preferences.

Steps:
1. Open the Settings app by clicking the Start menu and selecting Settings.
2. Click on Network & Internet.
3. In the Wi-Fi section, click on Manage known networks.
4. Find the network you want to forget and select it.
5. Click Forget.
6. The next time you connect to this network, Windows will prompt you to choose whether or not to connect automatically.

Conclusion

Managing the "Connect Automatically" feature for wireless networks in Windows 10 allows you to control which networks your computer connects to without requiring manual input. Whether you prefer to use the taskbar, settings menu, command prompt, or forget a network to reset preferences, this guide provides all the methods to easily enable or disable automatic connections.
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)